Sensor, Meter, Industrial Touch Screen Computer, PLC MPU Modules

SCH-DA2 high-performance universal servo driver
- High performance purpose Servo motor (DA2)
- high performance general purpose servo system
♦3 times overload capacity, bottom cogging torque, response speed ♦Real-time automatic gain adjustment ♦Support CANopen, EthercAT to realize multi-axishigh response synchronization control ♦STO function to meet environmental protection requirements ♦Motor Enclosure Level with IP65/67, meet the waterproof and dustproof requirement

view detail
SCH-G90 Micro Servo Motor
♦The common micro-motor, pulling force is second only to the 9G standard version of the servo, is currently a super good cost performance of the servo! ♦Due to the reduced pull force, the manufacturer recommends that it be used only for small electric aircraft models, not for larger fixed-wing and electric helicopters. ♦180 degrees is left and right 90 degrees, 360 degrees is not stop rotating!

view detail
SCH-D20-G Universal servo
- High performance bus-type servo drive
- Universal servo drive
♦Dual-core processing efficiency is higher, the high motor runs smoothly, the vibration when stopping is lower, and the response is faster ♦ Simple and easy-to-understand menu display ♦ The DB series plug for convenient wiring, simple operation and easy welding ♦Supports CANopen/EtherCAT bus control, Meet the needs of high-end equipment. ♦SD20 supports fully closed-loop control and gantry synchronization, and the driver can adapt to a wider range of places.

view detail
Schwahr 42/60mm Series 5 Phase
- 42mm series five-phase stepper motor
- Black five-phase stepper motor
♦Step accuracy:±5%(synchronizing, no-load); ♦Temperature rise:80℃Max; ♦Ambient temperature:-10℃—+50℃; ♦Insulation resistance:100MΩmin.500VDC; ♦Voltage resistance:500VACfor one minute; ♦Radial runout:0.06Max.(450g-load); ♦Axial runout:0.08Max.(450g-load).

view detail
3SC130 three-phase stepper motor driver
- 3R130 digital three-phase stepper driver
- Low noise digital three-phase stepper driver
♦Pulse mode: monopulse/double-pulse/orthogonal pulse♦Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC♦Power voltage: 110-230V AC;220V AC recommended

view detail
SCH-FSD22 series high-precision laser displacement sensor
- laser displacement range sensor analog 4~20 mA 0-5 V
- Laser displacement sensor module displacement sensor
♦Supply voltage: 24V DC, ambient temperature: +20°C, response time: 10ms, and analog output value ofmeasurement center distance are used for unspecified measurement conditions, The subiect is white ceramics ♦This is based on the FDA Standard, accordina to Laser Notice No, 50 of the FDA Standard. ♦This is the size in the measurement center distance. These values were defined by using 1/e2 (approx.13.5%) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point maybe higher than at the point and this may affect the measurement value.

view detail
3SC110PLUS three-phase stepper motor driver
- 3SC110PLUS high voltage digital three-phase stepper driver
- 3SC110PLUS three phase stepper motor
♦Pulse mode: monopulse/double-pulse/orthogonal pulse♦Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC♦Power voltage: 110-230V AC;220V AC recommended

view detail
SC130 two-phase stepper driver
- SC130 digital two-phase stepper driver
- SC130 high torque two-phase stepper driver
♦Pulse mode: monopulse/double-pulse/orthogonal pulse♦Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC♦Power voltage: 24~100V DC or 18~80V AC; 48V or 60V AC recommended

view detail
SC110PLUS two-phase stepper driver
- High voltage digital two-phase stepper motor driver
- Intelligent motion controller two-phase stepper motor driver
♦Pulse mode: monopulse/double-pulse/orthogonal pulse♦Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC♦Power voltage: 110-230V AC;220V AC recommended

view detail
SC86 two-phase stepper motor driver
- SC86 digital two-phase stepper driver
- SC86 high reliability two-phase stepper driver
♦Pulse mode: monopulse/double-pulse/orthogonal pulse♦Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC♦Power voltage: 24~100V DC or 18~80V AC; 48V or 60V AC recommended

view detail
SC60 two-phase stepper driver
- SC60 digital two-phase stepper driver
- SC60 high-precision two-phase driver
♦Pulse mode: monopulse/double-pulse/orthogonal pulse♦Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC♦Power voltage: 24-50V DC supply; 36 or 48V recommended

view detail
SCS86 digital display stepper servo driver
- SCS86 Digital closed loop stepper motor driver
- SCS86 stepper motor driver
♦Pulse mode: monopulse/double-pulse♦Signal level: 3.3-24V compatible; serial resistance not necessary for the application of PLC.♦Power voltage: 24-100V DC or 18-80V AC, 75V AC recommended

view detail

Products

Industrial Robot

Meter

Servo motor

PLC

Switch series

Frequency Inverter

Industrial PC

Sensor

HMI

IoT Gateway