Sensor

♦Supply voltage: 24V DC, ambient temperature: +20°C, response time: 10ms, and analog output value ofmeasurement center distance are used for unspecified measurement conditions, The subiect is white ceramics ♦This is based on the FDA Standard, accordina to Laser Notice No, 50 of the FDA Standard. ♦This is the size in the measurement center distance. These values were defined by using 1/e2 (approx.13.5%) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point maybe higher than at the point and this may affect the measurement value.

♦Exquisite appearance and light plastichousing, easy to mount and dismount ♦Only by pressing Long and short combination of two keys S, T to com-plete all function settings fastly ♦0.5mm diameter light spot to accurately measure very tiny objects ♦Key or remote teach-in to easily set response time for different applica-tions ♦Powerful function setting and flexible output way ♦Completeshieldeddesgin,strongeranti-interferenceperfomance ♦IP67 protection degree, able to work in water or dusty environment

♦Digital tube display, intuitive andconvenient ♦High accuracy 4 in 1 probe fortempeature, humidity, PM2.5PM10 measurement ♦Small volume, wall mountedflexible installation, easy to use ♦Full range temperature andhumidity compensation mea-surement,5~25vdc wide V-oltage design

♦Level switch based on vibrating short tuning fork technology. ♦Compact switch ♦Features a durable stainless steel body and tuning fork for use in a variety of liquid applications. ♦Installation via threads on pipes or tanks or via hygienic connections in food industry facilities ♦Direct load switching suitable for all power supplies or PNP outputs

♦Based on the self-developed CMOS millimeter wave RF chip, a more compact RF architecture, a higher signal-to-noise ratio, and a smaller blind zone are realized. ♦5GHz working bandwidth means higher measurement resolution and accuracy. ♦3°antenna beam angle, so the interference in the environment has less impact on the instrument, and the installation is more convenient. ♦Shorter wavelength yields good reflection properties on sloped solids, so aiming towards material angle of repose is usually not necessary. ♦Support remote debugging and remote upgrading to reduce the cost of field personnel. ♦Non-contact radar, wear-resistant and no pollution. ♦A variety of output circuit interfaces and acquisition system. ♦The integrated anti-corrosion cover structure effectively prevents the corrosive medium from coming into contact with the probe and has excellent anti-corrosion performance.

♦Stainless steel $304/S316, longer service life ♦ABS aluminum alloy structure is stronger and more durable ♦Stable and reliable performance, not easily affected by viscous liquids ♦Can be used in high temperature and high pressure environments ♦A variety of materials and connection methods to meet the needs of different environments ♦It can be installed horizontally on the side wall of the tank or vertically on the top of the tank.

♦ Suitable water quality range: 10uw~ 1000uw ♦ Output response speed: ≤ 1ms ♦Detection depth range: depending on the length of the allocated cable, it is generally 30m.which can be configured to 300m according to the user's requirements ♦ Probe detection error: ≤+0.5mm ♦ Applicable temperature of the instrument:-20℃℃ ~+ 60℃6. Measurement signal Display: Luminous tube, buzzer, electric meter indication

♦Easy installation and debugging,fully sealed integrated installation structure, no need for multipledebugging once installed ♦Strong adaptabilityf，can detect solid and liquid materials in high temperature, highpressure, large dust, and high viscosity environments ♦Stable performance，its performance is stable and reliable, and it is not easily affectedby viscous liquids ♦One click calibrationi，ddue to the use of digital circuits, users can complete calibrationonce in an empty state ♦Anti adhesion，advanced anti adhesion circuit design can eliminate materialadhesion and generate false error signals ♦Electrical interface，using ABS engineering plastic, the waterproof and dustproofsealing performance doubles  

♦Adopting international advanced technology, it has complete sounding, control, data transmission and human-machine communication functions ♦Depth sounding instrument integrating ultrasonic transceiver sensor, servo circuit, temperature compensation sensor and compensation circuit unit, display, control signal output and serial data or analog output unit (optional). ♦It has the characteristics of low maintenance, high reliability, long life, convenient use, simple operation and accurate measurement.

♦It adopts stainless steel shell and anti-corrosion sterile stainless steel process connection to meet the sanitary level measurement requirements. ♦The maximum temperature resistance is 150℃～200℃. ♦It is easy to use, does not need to be disassembled during cleaning and high-temperature sterilization, and is easy to operate. ♦Supports 4-20mA/1-5vdc analog output and Hart, RS232, RS485 digital communication.

1、Using silicon MEMS micro-pressure chip, fully digital calibration, temperature drift performance and stability are improved. 2、Two chip isolation methods：     • elastic silicone protection, mainly used for differential pressure measurement of non-corrosive gases of silicon and silica gel;     • 316L stainless steel isolation diaphragm protection, filled with silicone oil internally, suitable for measurement of media that does not corrode stainless steel .

♦Made of high-strength, high-elasticity, corrosion-resistant stainless steel material ♦ Special structural design and strain isolation technology, long-term stability is also greatly improved. ♦The entire instrument is integrated to ensure reliability under high-intensity vibration and impact during the hammer installation process and use. ♦Thick and shallow inner hole structure effectively prevents mud clogging and facilitates maintenance.