Pressure Sensor

♦It adopts stainless steel shell and anti-corrosion sterile stainless steel process connection to meet the sanitary level measurement requirements. ♦The maximum temperature resistance is 150℃～200℃. ♦It is easy to use, does not need to be disassembled during cleaning and high-temperature sterilization, and is easy to operate. ♦Supports 4-20mA/1-5vdc analog output and Hart, RS232, RS485 digital communication.

1、Using silicon MEMS micro-pressure chip, fully digital calibration, temperature drift performance and stability are improved. 2、Two chip isolation methods：     • elastic silicone protection, mainly used for differential pressure measurement of non-corrosive gases of silicon and silica gel;     • 316L stainless steel isolation diaphragm protection, filled with silicone oil internally, suitable for measurement of media that does not corrode stainless steel .

♦Made of high-strength, high-elasticity, corrosion-resistant stainless steel material ♦ Special structural design and strain isolation technology, long-term stability is also greatly improved. ♦The entire instrument is integrated to ensure reliability under high-intensity vibration and impact during the hammer installation process and use. ♦Thick and shallow inner hole structure effectively prevents mud clogging and facilitates maintenance.

1.It adopts micro-power wireless communication mode, no wiring is required, installation is faster, safer and more convenient. 2.Wireless communication uses 2.4G ZigBee communication protocol, strong anti interference ability, 16 physical channels are optional, 65535 network IDs can be set, and networking ability is strong. 3.There is also a matching wireless switching device, which can convert many wireless pressure signals into MODBUS standard signals and transmit them through Ethernet or serial port. 

♦Adopting OLED LCD display screen, supporting Chinese and English display ♦The use of microprocessors increases flexibility and functionality ♦One analog quantity+two switching quantity dual mode outputs ♦Support two calibration methods: debugger and button; Optional two point and three point calibration modes ♦Extremely low temperature fluctuation, suitable for use in industrial environments with temperatures ranging from -30 to 80 degrees Celsius ♦Very flexible switch point setting, automatic recognition of control direction, and automatic insertion of return difference ♦Excellent anti-interference characteristics.

●Dual screen display, clear and easy to read display content ●5-bit real-time pressure display on the main screen●Optional maximum, minimum, peak, and ambient temperature display for the secondary screen●Graphical pressure percentage and battery level display ●Over voltage flashing prompt to prevent instrument damage due to over voltage ●White backlight for easy night viewing ●10 pressure unit conversions, international standard ●The collection rate ranges from 30 seconds/time to 100 times/second, with a wider range of applications ●Automatic shutdown function effectively extends battery life

◆ CE conformity ◆ Low cost and high quality ◆ All stainless steel integrated structure ◆ Small size, convenient to install and operate ◆ 0.5-4.5V, 0-5V, 1-5V, various voltage output ◆ Complete surge voltage protection function ◆ For applications such as air, water, oil  

♦Circuit design from the power part of the selection of high quality power module ♦The patented acoustic wave intelligent technology software cancarry out intelligent echo analysis without any debugging and other special steps.  ♦This instrument is a non-contact instrument, no direct contact with the liquid. ♦All input and output lines of the instrument have the protectionfunction of lightning protectionand short circuit prevention.

♦With digital filtering and echo recognition function, can adjust the analog output function ♦The protection grade can beup to lP68, the selection of ABS engineering plastic material,impact resistance and aging resistance, durable, outlet length30cm ♦Using high quality isolationmodule high temperature andreliable components, can replace thesame type of foreign importedinstruments

♦Available in capacities from 0 to 20,000 lbs and 0 to 10,000 kg ♦Alloy steel, sealed by adhesive inside, oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments. ♦S beam design, tension and/or compression loading possible, easy installation, suitable for crane scale, mechanical conversion scale, hopper scale and other electronic weighing devices. ♦Provided with a certificate of conformance and full-scale calibration.  

♦LCD display, easy to read.The two-in-one level and liquid level are displayedby colleagues, and it supports switching between Chinese and English. ♦Intelligent sound wave & Echo analysis.Intelligent acoustic wave technology can perform intelligentecho analysis, without any debugging and other special steps,with an accuracy of0.5%,and it can resist variousinterferencewaves. ♦There are coil shock protection inside and outside the installationwhich is more stable, and the shell is integrally sealed to preventmoisture and ensure that the installation is more stable and firm.

♦Stainless Steel 304 shell ♦Oil-Filled Diffusion Silicon Core ♦Polyester Waterproof Outlet