♦Motor internal structure:Low operating temperature, long life, low noise and slight vibration. Stepless speed regulation, forward and reverse rotation
♦All copper coil:It adopts H-class (180℃) insulated enameled wire to withstand high temperatures, has a large safety margin and has a lifespan 10 times that of ordinary coils.
♦Seiko stator:The low-loss silicon steel sheet is precisely stamped in one piece, and ball bearings are installed at both ends. The friction is small, the temperature generated by friction is low, and the service life is long.
♦Precision gears:The accuracy is as high as IT5-6, wear-resistant cloth chipping, molybdenum-containing high-grade alloy steel spiral gear full ball bearing, fast start-up, high-quality nano grease, no need for refueling and maintenance.
Item No :
SCH-5IK90GUOrder(MOQ) :
5Payment :
T/TProduct Origin :
ChinaSchwahr 90/120W reduction motor
The Schwahr 90/120W micro gear reduction motor is composed of a reduction gearbox and a motor. It has the characteristics of full copper coil, low noise, and high torque.
Technical Specification
| Motor model | Specs | Outpu Power W |
Voltage V |
Frequency Hz |
Current A |
Starting Torque | Rated Torque | Rated Revolution r/min |
Capacity/Ve μ F/VAC |
||
| JWD type | m N.m | gf,cm | mN.m | gf.cm | |||||||
| SCH-5IK90GU-CF SCH-5IK90A-CF |
Induction |
90 | 1-phase 220 |
50 | 0.62 | 837 | 8370 | 670 | 6700 | 1350 | 5/450 |
| 60 | 0.60 | 692 | 6920 | 554 | 5540 | 1550 | 5/450 | ||||
| SCH-5RK90GU-CF SCH-5RK90A-CF |
Reversible 30min |
50 | 0.68 | 837 | 8370 | 670 | 6700 | 1350 | 6/450 | ||
| 60 | 0.72 | 692 | 6920 | 554 | 5540 | 1550 | 6/450 | ||||
| SCH-5IK90GU-AF SCH-5IK90A-AF |
Induction |
90 | 1-phase 110 |
50 | 1.25 | 837 | 8370 | 670 | 6700 | 1350 | 20/250 |
| 60 | 1.2 | 692 | 6920 | 554 | 5540 | 1550 | 18/250 | ||||
| SCH-5RK90GU-AF SCH-5RK90A-AF |
Reversible 30min |
50 | 1.38 | 837 | 8370 | 670 | 6700 | 1350 | 24/250 | ||
| 60 | 1.5 | 692 | 6920 | 554 | 5540 | 1550 | 24/250 | ||||
| SCH-5IK90GU-UF SCH-5IK90A-UF |
—— | 90 | 3-phase 380 |
50 | 0.32 | 837 | 8370 | 670 | 6700 | 1350 | —— |
| 60 | 0.3 | 692 | 6920 | 554 | 5540 | 1500 | —— | ||||
| SCH-5RK90GU-SF SCH-5RK90A-SF |
—— | 90 | 3-phase 220 |
50 | 0.55 | 837 | 8370 | 670 | 6700 | 1350 | —— |
| 60 | 0.48 | 692 | 6920 | 554 | 5540 | 1500 | —— | ||||
| SCH-5IK120GU-CF SCH-5IK120A-CF |
Induction |
120 | 1-phase 220 |
50 | 0.85 | 1137 | 11370 | 910 | 9100 | 1350 | 6/450 |
| 60 | 0.82 | 955 | 9550 | 764 | 7640 | 1500 | 6/450 | ||||
| SCH-5RK120GU-CF SCH-5RK120A-CF |
Reversible 30min |
50 | 0.95 | 1137 | 11370 | 910 | 9100 | 1350 | 8/450 | ||
| 60 | 1.0 | 955 | 9550 | 764 | 7640 | 1500 | 8/450 | ||||
| SCH-5IK120GU-AF SCH-5IK120A-AF |
Induction |
120 | 1-phase 110 |
50 | 1.7 | 1137 | 11370 | 910 | 9100 | 1350 | 24/250 |
| 60 | 1.65 | 955 | 9550 | 764 | 7640 | 1500 | 24/250 | ||||
| SCH-5RK120GU-AF SCH-5RK120A-AF |
Reversible 30min |
50 | 1.9 | 1137 | 11370 | 910 | 9100 | 1350 | 30/250 | ||
| 60 | 2.1 | 955 | 9550 | 764 | 7640 | 1500 | 30/250 | ||||
| SCH-5RK120GU-UF SCH-5RK120A-UF |
—— | 120 | 3-phase |
50 | 0.34 | 1137 | 11370 | 910 | 9100 | 1350 | —— |
| 60 | 0.31 | 955 | 9550 | 764 | 7640 | 1500 | —— | ||||
| SCH-5RK120GU-SF SCH-5RK120A-SF |
—— | 120 | 3-phase 220 |
50 | 0.59 | 1137 | 11370 | 910 | 9100 | 1350 | —— |
| 60 | 0.54 | 955 | 9550 | 764 | 7640 | 1500 | —— | ||||
Parameters in above table refer to motor alone,without any load device.
Permissible change in rated speed and rated current ofthe motor is within the range of ± 5%.
Allowable load for the gear motor
Geared-down parameter |
Synchronous speed | 500 | 300 | 250 | 200 | 150 | 120 | 100 | 75 | 60 | 50 | 45 | 37.5 | 30 | 25 | 20 | 15 | 12.5 | 10 | 8 | 7.5 | 6 | 5 | 3 | ||
| ratio | 3 | 5 | 6 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 100 | 120 | 150 | 180 | 200 | 250 | 300 | 500 | |||
Max allowable load |
90W | kg.cm N.m |
15.7 1.54 |
26.5 2.6 |
31.5 3.1 |
39.4 3.86 |
52.5 5.15 |
65.7 6.44 |
71 6.96 |
94.6 9.28 |
118 11.6 |
141 13.9 |
170 16.7 |
189 18.5 |
200 19.6 |
|||||||||||
| 120W | kg.cm N.m |
21.5 2.1 |
36 3.52 |
42 4.13 |
54 5.28 |
70 6.88 |
87.57 8.59 |
98 9.6 |
126 12.4 |
148 14.5 |
189 18.5 |
200 19.6 |
||||||||||||||
♦the speed isbased on the synchronous moor speed reduclion ratio as a benchmark calculated bydividimg the value of.Aclual speed will vary the size ofthe loadchanges in less than the values shownin2~15%.
♦Hone tothe tableofthe reduction ratio is ereaer than the further reduclion it would be installed betwen the motor and thereducer reduction ralo of 10 the mideofthe reducer.
♦When the load torque exceeds the maximum allowable load torque gear motor.and a locked rofor situation exists.please slow down boxat the iunclion oftheoutput shaft and load torque limit device installed to ensure the normal operation gearbox.
Dimensions
FAQ
Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds
What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.
How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.
Tel : +86 -13459014809
Email : sales@schwahrtechnology.com
No. 6788-1, Binhai West Avenue, Xike Town, Tong'an District, Xiamen City (Yincheng Zhigu)
Copyright © 2024 schwahr technology co,. ltd.
