♦Motor internal structure:Low operating temperature, long life, low noise and slight vibration. Stepless speed regulation, forward and reverse rotation
♦All copper coil:It adopts H-class (180℃) insulated enameled wire to withstand high temperatures, has a large safety margin and has a lifespan 10 times that of ordinary coils.
♦Seiko stator:The low-loss silicon steel sheet is precisely stamped in one piece, and ball bearings are installed at both ends. The friction is small, the temperature generated by friction is low, and the service life is long.
♦Precision gears:The accuracy is as high as IT5-6, wear-resistant cloth chipping, molybdenum-containing high-grade alloy steel spiral gear full ball bearing, fast start-up, high-quality nano grease, no need for refueling and maintenance.
Item No :
SCH-6RK200GUOrder(MOQ) :
5Payment :
T/TProduct Origin :
ChinaSchwahr 200/250W Reduction Motor
The Schwahr 90/120W micro gear reduction motor is composed of a reduction gearbox and a motor. It has the characteristics of full copper coil, low noise, and high torque.
Technical Specification
Motor mode | Specs | Output Power W |
Voltage V |
Frequency Hz |
Current A |
Starting Torque | Rated Torqu | Rated Revolution r/min |
Capacity/Ve uF/VAC |
||
JWD type |
mN.m | gf.cm | mN.m | gf.cm | |||||||
SCH-6IK200GU-CF SCH-6IK200A-CF |
Induction | 200 | 1-phase 220 |
50 | 1.55 | 1485 | 14850 | 1414 | 14140 | 1350 | 8/450 |
60 | 1.5 | 1294 | 12940 | 1232 | 12320 | 1550 | 8/450 | ||||
SCH-6RK200GU-CF SCH-6RK200A-CF |
Reversible 30min |
50 | 1.55 | 1485 | 14850 | 1414 | 14140 | 1350 | 10/450 | ||
60 | 1.5 | 1294 | 12940 | 1232 | 12320 | 1550 | 10/450 | ||||
SCH-6IK200GU-AF SCH-6IK200A-AF |
Induction | 200 | 1-phase 110 |
50 | 3.0 | 1485 | 14850 | 1414 | 14140 | 1350 | 32/250 |
60 | 2.8 | 1294 | 12940 | 1232 | 12320 | 1550 | 30/250 | ||||
SCH-6RK200GU-AF SCH-6RK200A-AF |
Reversible 30min |
50 | 3.0 | 1485 | 14850 | 1414 | 14140 | 1350 | 40/250 | ||
60 | 2.8 | 1294 | 12940 | 1232 | 12320 | 1550 | 36/250 | ||||
SCH-6IK200GU-UF SCH-6IK200A-UF |
200 | 3-phase 380 |
50 | 0.9 | 1600 | 16000 | 1450 | 14500 | 1350 | —— | |
60 | 0.87 | 1386 | 13860 | 1260 | 12600 | 1550 | —— | ||||
SCH-6RK200GU-SF SCH-6RK200A-SF |
200 | 3-phase 220 |
50 | 1.15 | 1600 | 16000 | 1450 | 14500 | 1350 | —— | |
60 | 1.1 | 1386 | 13860 | 1260 | 12600 | 1550 | —— | ||||
SCH-6IK250GU-CF SCH-6IK250A-CF |
Induction | 250 | 1-phase 220 |
50 | 1.6 | 2020 | 20200 | 1837 | 18370 | 1350 | 10/450 |
60 | 1.55 | 1700 | 17000 | 1540 | 15400 | 1550 | 10/450 | ||||
SCH-6RK250GU-CF SCH-6RK250A-CF |
Reversible 30min |
50 | 1.6 | 2020 | 20200 | 1837 | 18370 | 1350 | 12/450 | ||
60 | 1.55 | 1700 | 17000 | 1540 | 15400 | 1550 | 12/450 | ||||
SCH-61K250GU-AF SCH-6IK250A-AF |
Induction | 250 | 1-phase 110 |
50 | 3.2 | 2020 | 20200 | 1837 | 18370 | 1350 | 40/250 |
60 | 3.0 | 1700 | 17000 | 1540 | 1540 | 1550 | 40/250 | ||||
SCH-6RK250GU-AF SCH-6RK250A-AF |
Reversible 30min |
50 | 3.3 | 2020 | 20200 | 1837 | 18370 | 1350 | 48/250 | ||
60 | 3.2 | 1700 | 17000 | 1540 | 15400 | 1550 | 48/250 | ||||
SCH-6RK250GU-IH SCH-6RK250A-F |
250 | 3-phase 380 |
50 | 1.3 | 2022 | 20220 | 1840 | 18400 | 1350 | —— | |
60 | 1.2 | 1760 | 17600 | 1600 | 16000 | 1550 | —— | ||||
SCH-6RK250GU-SF SCH-6RK250A-SF |
—— | 250 | 3-phase 220 |
50 | 1.21 | 2022 | 20220 | 1840 | 18400 | 1350 | —— |
60 | 1.15 | 1760 | 17600 | 1600 | 16000 | 1550 | —— |
•Parameters in above table refer to motor alone.without any load device.
•Permissible change in rated speed and rated current ofthe motor is within the range of ± 596.
Allowable load for the gear motor
Geared-down parameter |
Synchronous speed(r/mn) | 500 | 300 | 200 | 150 | 120 | 100 | 85 | 75 | 60 | 50 | 40 | 37 | 30 | 25 | 20 | 15 | 12 | 10 | 8 | 7 | 6 | |
ratio | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 100 | 120 | 150 | 180 | 200 | 250 | ||
Max allowable load |
200W | kg.cm N.m |
39.4 3.86 |
66 6.44 |
89.8 8.8 |
119 11.7 |
149 14.5 |
180 17.6 |
214 21.0 |
239 23.4 |
299 29.3 |
358 35.1 |
392 38.4 |
435 42.6 |
440 43 |
||||||||
250W | kg.cm N.m |
49.3 4.83 |
82.1 8.1 |
112 11 |
149 14.6 |
486 18.3 |
224 22 |
268 26.4 |
298 29.3 |
375 36.6 |
438 43 |
440 43 |
♦ The speed is based on the synchronous motor speed reduction ratio as a benchmark calculated by dividing the value of.Actual speed will vary the size ofthe load
changesin less than the values shown in2~i5o
♦ Hope to the table of the reduction ratio is greater than the further reduction,it would be installed between the motor and the reducer reduction ratiio of 10 the middle
of the reducer.
♦ When the load torque exceeds the maximum allowable load torque gear motor,and alocked rotor situation exists,please slow down box at the junction of the
output shaft and load torgue limit device installed to ensure the normal operation gearbox.
Dimensions
FAQ
Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds
What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.
How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.