♦Response frequency up to 1.2kHz，support 17 bit/20 bit encoder，low cogging torque，3 times overload ability
♦Identification of load inertia，Real-time automatic gain adjustment
♦Automatic/Manual notch filter，Automatic/Manual vibration suppression control
♦Highly flexible script function，Internal position programming mode
♦EtherCAT to realize multi-axis high response synchronization control
Item No :
SCH-DV3Order(MOQ) :
5Payment :
T/TProduct Origin :
ChinaSCH-DV3 General purpose servo drive
Th SCH-DV3 series is a cost-effective servo sytem (motor & drive), which can be widely used in a large industry, such as laseimarking machine joint robot, linear mechanical hands, wood machinery, glass machinery, injection molding machinerywelding and cutting equipment, ceramic equipment, textile equipment, testing equipment, cable equipment, lithium batterequipment, electronic manufacturing equipment, miling machines, qrinding machines, CNC lathes, food production linespackaging production line, engraving and miling machine, engraving machine, high light machine, around line machinewarp knitting machine, labeling machine, veneer machines etc.
Technical Specification
| tem | Specifications | ||
| Input Power | Single /Three phase 220V/Three phase 380V | ||
| Voltage variation range (-15%~+10%)50/60Hz | |||
| Cooling Method | Fan cooling | ||
| Main Circuit Control Mode | Sinusoidal PWM drive | ||
| Feedback | 17Bit INC/20Bit INC | ||
| Control Mode | ①Position control ②Speed control ③Torque control ④Position/speed mode switch ⑤Position/torque mode switch ⑥Speed/torque mode switch ⑦Positioning operation mode |
||
| Position Control |
Max input pulse frequency |
Line Drive input:Max 500kHz Open Collector Input:Max 200kHz |
|
| Command pulse input mode |
①Command pulse/command signal ②Forward rotating pulse and reverse rotating pulse ③A/B phase orthogonal pulse |
||
| Command control mode |
①External command pulse input control ②Internal position data control | ||
| Electronic gear | Electronic Gear N/M times (N:1~4194304)/M:1~4194304) | ||
| Torque limitation | Parameter control (Forward rotating and reverse rotating can be set respectively)/ External analog torque control |
||
| Speed Control |
Analog command input |
VCL DCO~±10V | |
| Speed variation rate |
±1r/min or below (load range 0~100%) | ||
| Speed range | 1:5000 | ||
| Acceleration and deceleration time setting |
Acceleration time and deceleration time can be set respectively,and have two groups, and can accelerate and decelerate with S curve |
||
| Speed control method |
External analog input,Parameter setting,Communication speed command, Command pulse frequency |
||
| Torque Limitation | Parameter control (Forward rotating and reverse rotating can be set respectively)/ External analog torque control |
||
| Torque Control |
Analog command input |
VCL DCO~±10V | |
| Torque Limitation | Parameter control/External analog speed limitation | ||
| Digital Input/ Output |
Input | EI1~EI55 lines input,the function can be set freely according to the parameter | |
| Output | Encoder pulse outputs by frequency division,A/B/Z phase output by line drive | ||
| EOUT1~EOUT33 lines output,the function can be set freely according to the parameter |
|||
| Monitor | Feedback speed,reference speed,reference torque,motor current,feedback of curre- nt location,Location Difference,reference pulse frequency,Feedback Pulse Accumul- ation,Reference Pulse Accumulation,VREF input voltage,TREF input voltage,input terminal signal,output terminal signal etc |
||
| Protection (Alarm display) | Overcurrent (oc1,oc2),Over speeding (oS),Overvoltage(Hv),Memory Error (dE),Enc- oder Error(Ec),Overload (oL1,oL2),Main circuit under voltage (Lu),EI Repeat (ctE), Deviation overflow (oF),Servo motor drive overheat (AH)etc. |
||
| Applica- tion Environ- ment |
Site location | Indoors (Avoid direct sunlight),No corrosive gas (Avoid smoke,methane) | |
| Ambient Temperature |
0~50℃(When the ambient temperature is higher than the required one please introduce air circulation) |
||
| Storage Temperature | -20℃~75℃ | ||
| Relative humidity | RH 90%lower (No condensation) | ||
| Altitude | Lower than 1000m | ||
| Atmospheric pressure | 86~106kPa | ||
| Vibration | ≤0.5G | ||
Product Characteristics
Product Wiring diagram
Optional Accessories
FAQ
Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.
How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.
Hot Tags :
Tel : +86 -13459014809
Email : sales@schwahrtechnology.com
No. 6788-1, Binhai West Avenue, Xike Town, Tong'an District, Xiamen City (Yincheng Zhigu)
Copyright © 2024 schwahr technology co,. ltd.
