♦0-50℃ temperature compensation and a heating device is installed on the transducer, which automatically heats when the temperature is below 10°C, ensuring normal measurements in extremely low-temperature or icy conditions
♦ Low power consumption: <100mA
♦Measurement results are not affected by obstacles
♦With lightning protection, surge protection, and overcurrent protection
Item No :
SCH-ULTOrder(MOQ) :
5Payment :
T/TProduct Origin :
China4-20ma ultrasonic liquid level transmitter for water treatment
The SCH-ULT ultrasonic liquid level sensor is a very practical level measuring sensor with simple installation and convenient on-site commissioning. Not affected by the measured medium. It can measure the liquid level of various mediums with an accuracy of 0.5%. It uses SMD components and ASC chip, which makes the circuit compact and concise. The circuit board is plated and has high stability and long-term reliability. Meanwhile, the shell uses Polypropylene materials with sturdy texture and good acoustic property. The transducer can be used in most working condition sites.
Technical Specification
Measuring range | 2.5m, 5m, 10m, others on request |
Blind area | ≤150mm(for 2.5m &5m ranges); ≤500mm(for 10m range) |
Accuracy | 0.5%F.S (typical), 0.25%F.S (by customized) |
Beam angle | 15° |
Measuring mode | Distance mode(default), or level mode optional |
Output signal | RS485+4~20mA; RS485+0~5V |
Power supply | 10~30VDC(24VDC recommended, 5~30VDC by customized) |
Working temperature | -10~50℃(-40~80℃ by customized) |
Working current | ≤100mA |
Installation mode | Nut clamping fixed installation, screw-in installation, M68×2 |
Response time | 0.1s~10s(adjustable) |
Product material | Polypropylene + glass fiber |
IP rating | IP67 typical, IP68 by customized |
Product Display
FAQ
Can I get a lower price if I order large quantities?
Yes, Cheaper prices with bigger size orders, please contact us and we will give you a quatation.
Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds
What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
Hot Tags :