Item No :
SCH-22NHLEDOrder(MOQ) :
5Payment :
T/TProduct Origin :
ChinaSCH-22NHLED Fiber optic amplifier for detecting LED light source
Technical Specification
Model# | SCH-22NHLED | |
Operation Voltage | DC12~24V±10% | |
No-load Current | ≤40mA | |
Light Source | No light source,receiving the brightness of the detected object | |
Response Time | P0:<50μs;P1:<200μs;P2:<400μs;P3:<800μs;P4:<4ms | |
Response Frequency | 10KHz | |
Delay Function | No delay/Single delay/Pull up delay/Pull downdelay | |
Output Mode*1 | NPN open-collectorNPN | |
Max input Current | 100mA | |
Max Residue Voltage | <1.5V(at the load current is 100mA and the wire is 2m) | |
Switching Mode | Light.on/Dark.on switchable | |
Digital Display | Threshold setting value:4 digit green LED;Current value:4 digit red LED | |
Ambient Temperature | Operation:10℃~55℃;Storage:25℃~70℃,no freezing | |
Ambient Humidity | Operation:35%~85%RH;Storage:35%~95%RH,No condensation | |
Protection Circuit | Polarity reversal protection/surge protection/short circuit protection | |
Protection Level | IP64 | |
Connection | 3-core,standard cable length 2 meters | |
Housing Material | ABS | |
Withstand Voltage | AC500V,50/60Hz,1min | |
Vibration Resistance | 10~55Hz,dual amplitude 1.5mm,2 hours each in X/Y/Z directions |
|
Impact Resistance | 500m/S²,XYZ derection each 10 times | |
Insulation Impedance | Above 20MQ(DC500V megger) |
Product Display
Dimension Drawing
FAQ
Can I get some samples?
Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order.
How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.