Stepper

SCH-DV3 General purpose servo drive

SCH-DV3 General purpose servo driveTh SCH-DV3 series is a cost-effective servo sytem (motor & drive), which can be widely used in a large industry, such as laseimarking machine joint robot, linear

SCH-DV3 General purpose servo drive

Th SCH-DV3 series is a cost-effective servo sytem (motor & drive), which can be widely used in a large industry, such as laseimarking machine joint robot, linear mechanical hands, wood machinery, glass machinery, injection molding machinerywelding and cutting equipment, ceramic equipment, textile equipment, testing equipment, cable equipment, lithium batterequipment, electronic manufacturing equipment, miling machines, qrinding machines, CNC lathes, food production linespackaging production line, engraving and miling machine, engraving machine, high light machine, around line machinewarp knitting machine, labeling machine, veneer machines etc.

Technical Specification

temSpecifications
Input PowerSingle /Three phase 220V/Three phase 380V
Voltage variation range (-15%~+10%)50/60Hz
Cooling MethodFan cooling
  Main Circuit Control ModeSinusoidal PWM drive
Feedback17Bit INC/20Bit INC
Control Mode①Position control ②Speed control ③Torque control ④Position/speed mode switch
⑤Position/torque mode switch ⑥Speed/torque mode switch
⑦Positioning operation mode
Position
Control
Max input
pulse frequency
Line Drive input:Max 500kHz
Open Collector Input:Max 200kHz
Command    pulse
input mode
①Command pulse/command signal ②Forward rotating pulse and reverse
rotating pulse ③A/B phase orthogonal pulse
Command control
mode
①External command pulse input control ②Internal position data control
Electronic gearElectronic Gear N/M times (N:1~4194304)/M:1~4194304)
Torque limitationParameter control (Forward rotating and reverse rotating can be set respectively)/
External analog torque control
Speed
Control
Analog    command
input
VCL DCO~±10V
Speed variation
rate
±1r/min or below (load range 0~100%)
Speed range1:5000
Acceleration and
deceleration time
setting
Acceleration time and deceleration time can be set respectively,and have two groups,
and can accelerate and decelerate with S curve
Speed control
method
External analog input,Parameter setting,Communication speed command,
Command pulse frequency
Torque LimitationParameter control (Forward rotating and reverse rotating can be set respectively)/
External analog torque control
Torque
Control
Analog    command
input
VCL DCO~±10V
Torque LimitationParameter control/External analog speed limitation
Digital
Input/
Output
InputEI1~EI55 lines input,the function can be set freely according to the parameter
OutputEncoder pulse outputs by frequency division,A/B/Z phase output by line drive
EOUT1~EOUT33 lines output,the function can be set freely according to the
parameter
MonitorFeedback speed,reference speed,reference torque,motor current,feedback of curre-
nt location,Location Difference,reference pulse frequency,Feedback Pulse Accumul-
ation,Reference Pulse Accumulation,VREF input voltage,TREF input voltage,input
terminal signal,output terminal signal etc
Protection (Alarm display)Overcurrent (oc1,oc2),Over speeding (oS),Overvoltage(Hv),Memory Error (dE),Enc-
oder Error(Ec),Overload (oL1,oL2),Main circuit under voltage (Lu),EI Repeat (ctE),
Deviation overflow (oF),Servo motor drive overheat (AH)etc.
Applica-
tion
Environ-
ment
Site locationIndoors (Avoid direct sunlight),No corrosive gas (Avoid smoke,methane)
Ambient
Temperature
0~50℃(When the ambient temperature is higher than the required one
please introduce air circulation)
Storage Temperature-20℃~75℃
Relative humidityRH 90%lower (No condensation)
AltitudeLower than 1000m
Atmospheric pressure86~106kPa
Vibration≤0.5G

Servo Drive External Description

SDV3 Servo Drive External Description

Product  Characteristics

SDV3 Notch Filter(Auto-Notch Filter)

SDV3 Script Function

 

Product Wiring diagram

SDV3 Product Wiring diagram

SDV3 System Structure Diagram

SDV3 Installation Notes

Optional Accessories

Servo Motor Model SCH060401C

Servo Motor ModelSCH080731B

FAQ

Can you produce according to the samples or drawings?

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

What is the lead time?

For standard models, lead time is about 3~5 days after order confirmed and payment received.

For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.

 

How to solve the quality problems after sales?

Take photos or videos of the problems and send to us.

We will make a satisfied solution for you within 24 hours after we confirm the problems.


热门推荐