♦Made of high-strength, high-elasticity, corrosion-resistant stainless steel material
♦ Special structural design and strain isolation technology, long-term stability is also greatly improved.
♦The entire instrument is integrated to ensure reliability under high-intensity vibration and impact during the hammer installation process and use.
♦Thick and shallow inner hole structure effectively prevents mud clogging and facilitates maintenance.
PM460 high elastic corrosion-resistant oilfield pressure sensor
PM460 Hammer union pressure transmitter is made of high-strength, high-elasticity, corrosion-resistant stainless steel. It is a high-reliability, corrosion-resistant, high-long-term stability product specially designed for oil pressure testing of oil wells such as cobalt wells, cementing and fracturing vehicles.
Technical Specification
| Media to be measured | wet soil, crude oil, corrosive liquids and gases |
| Pressure type | absolute pressure, sealed reference pressure, vent pressure |
| Range | 0~35MPa, 70MPa, 105MPa, 140MPa, 210MPa, 315MPa |
| Power supply | 9-30VDC |
| Output signal | 4-20mA, 0-5VDC, 1-5VDC, 0-10VDC, 3mV/V |
| Nonlinear | 0.04% FS |
| Repeatability | 0.04% FS |
| Accuracy | 0.1% FS, 0.2% FS, 0.5% FS |
| Long-term stability | 0.1% FS / year (typical) |
| Working temperature | -43~85°C/125°C |
| Compensation temperature | -25 ~ 70 ° C / 100 ° C |
| Response time | ≤ 1 millisecond (typical) |
| Insulation resistance | ≥500MΩ/100V |
| Overload pressure | 200% FS (2 times full scale, special: 5 times full scale) |
| Destruction pressure | 500% FS (5 times full scale, special 10 times full scale) |
| Vibration resistance | about 10g/0~2000HZ |
| Vibration resistance | about 10g/0~2000HZ |
| Impact resistance | about 50g/1ms |
| Connection method | Chuck seal or specifified |
| Wetted material | 17-4PH stainless steel |
| Relative humidity | 0~100%RH |
| Protection rating | IP67 |
| Electrical output lead | aerospace connector, Amphenol |
Product Display







FAQ
Could I have prices of your products?
Welcome. Pls feel free to send us an email here. You will get our reply in 24 hours
Can we print our logo/website/company name on products?
Yes, please advise the size and Pantone Code of the logo.
What's the lead time for regular order?
3~7 days for order quantity lower than 500pcs, For more quantity, usually 15 days.