DC Servo

S-Series Sensorless BLDC Drive

S-Series Sensorless BLDC DriveS series Inductive speed regulation brushless Drives, based on Hallless FOC control technology, can drive various brushless motors. The drive automatically tunes and matc

S-Series Sensorless BLDC Drive

S series Inductive speed regulation brushless Drives, based on Hallless FOC control technology, can drive various brushless motors. The drive automatically tunes and matches the corresponding motor, supports PWM and potentiometer speed regulation functions, and can also run through 485 networking, which is suitable for highperformance brushless motor control occasions.

Typical application: Production line,Li-on battery equipment,Solar energy equipment,3C electrical equipment.

Technical Specification

Working voltage S200: DC input voltage 18VDC~48VDC, recommended working voltage 24VDC~48VDCS400: DC input voltage 18VDC~48VDC; recommended working voltage 24VDC~48VDC

It has over-current, over-voltage, under-voltage and other protection functions, and the optional output alarm prompts the on-board USB to serial port chip, which can be connected and debugged using an ordinary Micro-USB data cable.

1.The acceleration and deceleration of the speed command can be set

2.Using FOC magnetic field positioning technology and SVPWM technology

3.Supports potentiometer speed adjustment or 0~5V analog input signal

4.3 digital inputs/1 digital output interface with configurable functions

Inductive driver

Environmental condition

 Items Description
  Using ambient temperature -20 to 50°C(not frozen)
Store temperature Below 20%to 90%RH (no condensation
humidity -20~60°C(maximum temperature guaranteed:80°C 72 hours
Storage humidity Below 20%to 90%RH (no condensation
WibrationUp to 49m/s2
lmpactUnder 490 m/s2
Level of protectionIP54
AltitudeBelow 1000m

RS485 communication port

Signal namePin numberFeatures
Communication
signal
RS485+1 RS485 communication port
RS4852
 GND3
Reserved4Hold,do not connect
5
6
7
8

Control signal wiring instructions

 FeaturesSymbolsnstructions
Power input port VDCnput the positive DC power:+24V to+48V
 GNDInput DC source:OV
Motor wire port UMotor  power  line  U  phase
 VMotor power line Vphase
 WMotor power line Wphase


 Control signal port
 COM24V24V control signal input common end (Note 24V and 5V input can only be selec
 EN/(IN1)External command pulse input port/(universal digital input port 1)
 F/R/(IN2)External instruction direction input port/(universal digital input port 2)
 BREAK/(IN3)External Enable input port /(Universal digitalinput port 3)
 COMOVControl   signal   output   common   end:OV
 ALM/(OUT1)Control signal output common end:OW

 

Product Display

Installation dimensions

FAQ

Can we accept samples customized?

No problem for samples order, and welcome your testing before your big order.

 

OEM and ODM are available?

Yes, we accept customized products

 

Can I get a lower price if I order large quantities?

Yes, Cheaper prices with bigger size orders, please contact us and we will give you a quatation.


热门推荐