Stepper

SCHWAHR 80 servo motor set

80 servo motor set110 220V Servo Motor Kit With Magnetic 17bit Absolute Encoder + T3D 15A Driver For CNC EngraverTechnical SpecificationServoMotorWithMagnetic17bitAbsoluteEncoderServo Motor ModelMotor

80 servo motor set

110 220V Servo Motor Kit With Magnetic 17bit Absolute Encoder + T3D 15A Driver For CNC Engraver

Technical Specification

Servo Motor With Magnetic 17bit Absolute Encoder
Servo Motor ModelMotor Flange
RS485
(Modbus)
Customized
cable length
BrakeMotor Shaft
Diameter
60AST-A1C01330Nema2460mmx60mm
(mounting hole distance
49.5mm)
400wSupportSupport(3-15meter)Optional14mm
With 5mm Key
60AST-A1C01930600w
80AST-A1C02430Nema3280mmx80mm
(mounting hole distance
63.6mm)
750w19mm
With 6mm Key
80AST-A1C040251000w

 

Technical Specifications
Rated Voltage ( V)220220220220
Rated Power ( W)4006007501000
Rotor pole pairs ( P )5555
Rated Torque ( Nm )1.271.912.43.8
Instantaneous max torque (Nm )3.825.737.211.4
Rated Speed / Max Speed (rpm)3000/60003000/60003000/50002500/3000
Rated Current ( A )2.8±10%4±10%4.8±10%
Instantaneous Max Current (A )8.4±10%12±10%14.4±10%
Moment Coefficient (Nm/A )0.42±10%0.54±10%0.5±10%0.93±10%
Back EMF Coefficient ( X10 V/rpm)27.5±10%32.5±%33.2±10%56±10%
Resistance (Ω )3±10% ( 20℃ )3.2± 10%(20 ℃)1.6 ± 10%(20 ℃)3±10%(20℃)
Inductance ( mH)7.8±20% ( 20℃ )8.4±20% ( 20℃)9.5±20% (20℃)19±20% (20℃)
Moment of inertia ( X10V/rpm )0.68 [0.73] ± 10%0.82[1.7] ± 10%1.72 [1.77]± 10%2.4[2.45]±10%
Max radial load ( N )245392
Max axial load ( N )74147
Weight ( KG)1.22 [1.65]± 10%1.4[1.7]±10%2.2[3]±10%2.71[3.36]±10%
Encoder Resolution10000ppr
Protection StructureIP65
Insulation classF
Insulation ResistanceMore than 20m Ω DC500V
Insulation Withstand voltageAC 1500V 1minutes
Vibration LevelRated A for operation
Turn AroundForward turn command,viewed from load sid, counterclockwise (CCW)
SurroundingsTemperature -20℃ ~ 40 ℃, humidity 20% ~ 80% RH ( no condensation ) , altitude below 1000
Temperature - 20℃ ~ 60℃, (no freezing) humidity 20% ~ 80% RH (no condensation)
Impact Strength98m/S ²
Vibration Resistance49m/S ²

 

Power400w600w750w1000w
Rated Voltage DC (V)24±10%
Rated Power (W)0.30.56
Insulation ClassF
Static Torque (Nm)≥1.5≥2≥4
Insulation Resistance (MΩ )>500
Resistant to high voltage1500V/1S/5mA
Rotary Clearance≤0.5
Operating Ambient Temperature-10~+40
Attract Time≤50≤60
Release Time≤20
Attract Voltage≤19.2
The release of the voltage>1.5
Running noise<60

 

Product Display

80AST-A1C02430 PRODUCT LIST

♦1* 400W 60AST-A1C01330 Servo Motor ( 17 bit absolute )/1* 600W 60AST-A1C01930 Servo Motor 

♦1* T3D-L15A AC Driver (no fans)

♦1* 3Meter Encoder Cable + Power Cable

♦1* Control Signal Cable

♦2* 2K 1/4W resistance

♦1*RS485 Cable

60AST AC Servo Motor Driver size

400W AC Servo Motor motor size

MetInfo enterprise content manager system | MetInfo CMS

600W  Servo Motor motor size

750W  Servo Motor motor size

 Servo Motor motor TECHNICALPARAMETER

 Servo Motor motor lead line definition

MetInfo enterprise content manager system | MetInfo CMS

 

SymbolNameFunction
POWPower  LightThe decimal point of the second digital bube from the left lights up to indicate that the servo is under voltage
(none)
RUNRuning lightThe decinal point of the first digital tube from the left lights up to indicate that the servo is enabled
(none)
▲Add keyIncrease the serial number of value, long press has repeat effect
▼ Decrease KeyDecrease the serial number of value,long preass haas repeat effect
◀Exit KeyMenu exit, operation cancelled,
SETEnter Menu Entry,parameter modification confirmation or operation confirmation

MetInfo enterprise content manager system | MetInfo CMS

60AST AC Servo Motor Driver Wiring instructions

MetInfo enterprise content manager system | MetInfo CMS

Common parameters:

P-036 is changed to 1 (reverse direction) 0 (positive direction) motor direction conversion parameter. The default is 1 reverse direction

P-029 (electronic gear ratio numerator) is 1 by default, the higher the value, the faster the speed

(The above parameters are general setting parameters. If you need to modify other parameters, please refer to the manual or contact the technical/sales personnel)

The following parameters are rigid adjustment parameters. No adjustment is needed if the equipment is OK

P-005 (Speed ring rigidity)

P-009 (Position ring rigidity)

P-006 (generally, the maximum setting is about 100)

P-019 (generally, the maximum setting is about 300)

 

The specific adjustment of rigid parameters depends on the transmission structure and load of the equipment. Contact the after-sales service personnel for specific questions.

 

FAQ

Can you produce according to the samples or drawings?

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

What is the lead time?

For standard models, lead time is about 3~5 days after order confirmed and payment received.

For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.


热门推荐