Parallelaxis series reduction motor

Schwahr 200/250W Reduction Motor

Schwahr 200/250W Reduction MotorTheSchwahr90/120Wmicro gear reduction motor is composed of a reduction gearbox and a motor. It has the characteristics of full copper coil, low noise, and high torque.T

Schwahr 200/250W Reduction Motor

The Schwahr 90/120W  micro gear reduction motor is composed of a reduction gearbox and a motor. It has the characteristics of full copper coil, low noise, and high torque.

Technical Specification

Motor modeSpecs
Output
Power
W

Voltage

V

Frequency

Hz

Current

A
Starting TorqueRated TorquRated
Revolution
r/min
Capacity/Ve

uF/VAC

JWD type
mN.mgf.cmmN.mgf.cm
SCH-6IK200GU-CF
SCH-6IK200A-CF
Induction200
1-phase
220
501.5514851485014141414013508/450
601.512941294012321232015508/450
SCH-6RK200GU-CF
SCH-6RK200A-CF
Reversible
   30min
501.55148514850141414140135010/450
601.5129412940123212320155010/450
SCH-6IK200GU-AF
SCH-6IK200A-AF
Induction200
1-phase
110
503.0148514850141414140135032/250
602.8129412940123212320155030/250
SCH-6RK200GU-AF
SCH-6RK200A-AF
Reversible
30min
503.0148514850141414140135040/250
602.8129412940123212320155036/250
SCH-6IK200GU-UF
SCH-6IK200A-UF

200
3-phase
380
500.91600160001450145001350——
600.871386138601260126001550——
SCH-6RK200GU-SF
SCH-6RK200A-SF

200
3-phase
220
501.151600160001450145001350——
601.11386138601260126001550——
SCH-6IK250GU-CF
SCH-6IK250A-CF
Induction250
1-phase
220
501.6202020200183718370135010/450
601.55170017000154015400155010/450
SCH-6RK250GU-CF
SCH-6RK250A-CF
Reversible
30min
501.6202020200183718370135012/450
601.55170017000154015400155012/450
SCH-61K250GU-AF
SCH-6IK250A-AF
Induction250
1-phase
110
503.2202020200183718370135040/250
603.017001700015401540155040/250
SCH-6RK250GU-AF
SCH-6RK250A-AF
Reversible
30min
503.3202020200183718370135048/250
603.2170017000154015400155048/250
SCH-6RK250GU-IH
SCH-6RK250A-F

250
3-phase
380
501.32022202201840184001350——
601.21760176001600160001550——
SCH-6RK250GU-SF
SCH-6RK250A-SF
——250
3-phase
220
501.212022202201840184001350——
601.151760176001600160001550——

•Parameters in above table refer to motor alone.without any load device.

•Permissible change in rated speed and rated current ofthe motor is within the range of ± 596.

 

Allowable load for the gear motor


Geared-down
parameter
Synchronous speed(r/mn)500300200150120100857560504037302520151210876
ratio357.51012.515182025303640506075100120150180200250
Max allowable
load
200Wkg.cm
N.m
39.4
3.86
66
6.44
89.8
8.8
119
11.7
149
14.5
180
17.6
214
21.0
239
23.4
299
29.3
358
35.1
392
38.4
435
42.6
440
43
250Wkg.cm
N.m
49.3
4.83
82.1
8.1
112
11
149
14.6
486
18.3
224
22
268
26.4
298
29.3
375
36.6
438
43
440
43

♦ The speed is based on the synchronous motor speed reduction ratio as a benchmark calculated by dividing the value of.Actual speed will vary the size ofthe load

changesin less than the values shown in2~i5o

♦ Hope to the table of the reduction ratio is greater than the further reduction,it would be installed between the motor and the reducer reduction ratiio of 10 the middle

of the reducer.

♦  When the load torque exceeds the maximum allowable load torque gear motor,and alocked rotor situation exists,please slow down box at the junction of the

output shaft and load torgue limit device installed to ensure the normal operation gearbox.

 

Dimensions

200/250W Dimensions

FAQ

Can you produce according to the samples or drawings?

Yes, we can produce by your samples or technical drawings. We can build the molds 

 

What is the lead time?

For standard models, lead time is about 3~5 days after order confirmed and payment received.

For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.

 

How to solve the quality problems after sales?

Take photos or videos of the problems and send to us.

We will make a satisfied solution for you within 24 hours after we confirm the problems.


热门推荐