L-shaped series micro reduction motor
The L-type series reduction motor has an all-copper coil and is equipped with a lightweight cooling fan. The internal design is exquisite, stable and durable.
Technical Specification
6/10W L-type series reduction motor
| Motor model | Specs | Outpu Power W | Voltage V | Frequency Hz | Current A | Starting Torque | Rated Torque | Rated Revolution r/min | Capacity/Ve μ F/VAC |
| JWD types | mN.m | mN,m | |||||||
| 2RK-6GNL-A | Reversible | 6 | 1-phase 110 | 50 | 0.26 | 60 | 47 | 1200 | 4μF/250V |
| 60 | 0.23 | 55 | 38 | 1450 | |||||
| 2IK-6GNL-A | Induction | 50 | 0.24 | 55 | 47 | 1200 | 3.5.μF/250V | ||
| 60 | 0.25 | 50 | 38 | 1450 | |||||
| 2RK-6GNL-C | Reversible | 6 | 1-phase 220 | 50 | 0.14 | 55 | 48 | 1200 | 1.0μF/450V |
| 2IK-6GNL-C | Induction | 50 | 0.13 | 50 | 48 | 1200 | 0.8μF/450V | ||
| 2RK-10GNL-C | Reversible | 10 | 1-phase 220 | 50 | 0.2 | 80 | 79 | 1200 | 1.0μF/450V |
| 60 | 0.23 | 75 | 69 | 1450 | |||||
| 2IK-10GNL-C | Induction | 10 | 50 | 0.16 | 80 | 79 | 1200 | ||
| 60 | 0.2 | 75 | 69 | 1450 | |||||
| 2RK-10GNL-A | Reversible | 10 | 1-phase 110 | 50 | 0.28 | 85 | 78 | 1200 | 4.5μF/250V |
| 60 | 0.31 | 80 | 71 | 1450 | |||||
| 2IK-10GNL-A | Induction | 10 | 50 | 0.25 | 85 | 78 | 1200 | ||
| 60 | 0.29 | 80 | 71 | 1450 |
Allowable load for the gear motor
| Geared-down parameter | Synchronous speed | 500 | 417 | 300 | 250 | 200 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 41 | 37 | 30 | 25 | 20 | ||||||
ratio | 3 | 3.6 | 5 | 6 | 7.5 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | |||||||
| Max allowable load | 6W | kg.cm N.m | 1.3 0.13 | 1.6 0.16 | 2.32 0.22 | 2.67 0.26 | 3.3 0.32 | 4.5 0.43 | 5.5 0.53 | 6.2 0.6 | 7.3 0.72 | 8.1 0.8 | 9.7 0.96 | 11.2 1.1 | 13.8 1.38 | 15.2 1.5 | 17.1 1.7 | 21.2 2.1 | 25.3 2.5 | |||||
| 10W | kg.cm N.m | 2.1 0.2 | 2.51 0.25 | 3.42 0.34 | 4.1 0.4 | 5.3 0.5 | 6.7 0.67 | 8.7 0.86 | 10.1 1.0 | 11.6 1.15 | 12.9 1.28 | 16.2 1.6 | 19.2 .92 | 23.1 2.3 | 26.2 2.6 | 28.2 2.8 | 3.0 | |||||||
15/20W L-type series reduction motor
| Motor model | Specs | Output Power W | Voltage V | Frequency Hz | Current A | Starting Torque | Rated Torque | Rated Revolution r/min | Capacity/Ve μ F/VAC | ||
| JWD types | mN,m | gf.cm | mN.m | gfem | |||||||
| 31K15GNL-C | Induction | 15 | 1-phase 220 | 50 | 0.15 | 143 | 1430 | 115 | 1150 | 1250 | 1.2/450 |
| 60 | 0.14 | 120 | 1200 | 95.5 | 955 | 1500 | 1.2/450 | ||||
| 3RK15GNL-C | Reversible | 50 | 0.16 | 187 | 1870 | 150 | 1500 | 1250 | 1.5/450 | ||
| 60 | 0.18 | 158 | 1580 | 127 | 1270 | 1500 | 1.5/450 | ||||
| 3IK15GNL-A | Induction | 15 | 1-phase 110 | 50 | 0.33 | 143 | 1430 | 115 | 1150 | 1250 | 5/250 |
| 60 | 0.30 | 120 | 1200 | 95.5 | 955 | 1500 | 5/250 | ||||
| 3RK15GNL-A | Reversible | 50 | 0.36 | 187 | 1870 | 150 | 1500 | 1250 | 6/250 | ||
| 60 | 0.38 | 158 | 1580 | 127 | 1270 | 1500 | 6/250 | ||||
| 31K15GNL-U | — | 15 | 3-phase 380 | 50 | 0.06 | 143 | 1430 | 115 | 1150 | 1250 | |
| 60 | 0.055 | 120 | 1200 | 95.5 | 955 | 1500 | |||||
| 3RK15GNL-S | — | 15 | 3-phase 220 | 50 | 0.1 | 143 | 1430 | 115 | 1150 | 1250 | |
| 60 | 0.1 | 120 | 1200 | 95.5 | 955 | 1500 | |||||
| 3IK20GNL-C | Induction | 20 | 1-phase 220 | 50 | 0.22 | 187 | 1870 | 150 | 1500 | 1250 | 2/450 |
| 60 | 0.22 | 158 | 1580 | 127 | 1270 | 1500 | 2/450 | ||||
| 3RK20GNL-C | Reversible | 50 | 0.26 | 187 | 1870 | 150 | 1500 | 1300 | 2.5/450 | ||
| 60 | 0.28 | 158 | 1580 | 127 | 1270 | 1550 | 2.5/450 | ||||
| 3IK20GNL-A | Induction | 20 | 1-phase 110 | 50 | 0.45 | 187 | 1870 | 150 | 1500 | 1250 | 8/250 |
| 60 | 0.46 | 158 | 1580 | 127 | 1270 | 1500 | 8/250 | ||||
| 3RK20GNL-A | Reversible | 50 | 0.54 | 187 | 1870 | 150 | 1500 | 1300 | 10/250 | ||
| 60 | 0.58 | 158 | 1580 | 127 | 1270 | 1550 | 9/250 | ||||
Allowable load for the gear motor
Geared-down parameter | Synchronous speed | 500 | 300 | 250 | 200 | 150 | 120 | 100 | 75 | 60 | 50 | 40 | 35 | 30 | 25 | 20 | 15 | 12 | 10 | 8 | 7.5 | 6 | 5 | |
| ratio | 3 | 5 | 6 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 100 | 120 | 150 | 180 | 200 | 250 | 300 | ||
| Max allowable load | 15W | kg.cm N.m | 2.86 0.28 | 4.81 0.48 | 5.67 0.56 | 7.51 0.75 | 9.46 0.93 | 11.8 1.18 | 14.7 1.47 | 17 1.67 | 21.5 2.15 | 23.5 2.35 | 30.6 3.01 | 34.1 3.34 | 39.27 3.92 | 47.1 4.7 | 50 4.9 | |||||||
| 20W | kg.cm N.m | 3.52 0.35 | 5.80 0.58 | 7.56 0.75 | 8.74 0.87 | 12.6 1.24 | 14.5 1,45 | 17.15 .71 | 22.6 2.23 | 26.1 2.61 | 30.4 3.04 | 40.8 4.01 | 45.5 4.4 | 50 4.9 | ||||||||||
25/30W L-type series reduction motor
| Motor model | Specs | Output Power W | Voltage V | Frequency Hz | Current A | Starting Torque | Rated Torque | Rated Revolution r/min | Capacity/Ve μF/VAC | ||
| JWD type | mN.m | gf.em | mN.m | gf.cm | |||||||
| 4IK25GNL-C | Induction | 25 | 1-phase 220 | 50 | 0.22 | 231 | 2310 | 185 | 1850 | 1250 | 1.5/450 |
| 60 | 0.21 | 192 | 1920 | 154 | 1540 | 1550 | 1.5/450 | ||||
| 4RK25GNL-C | Reversible | 50 | 0.24 | 231 | 2310 | 185 | 1850 | 1250 | 2/450 | ||
| 60 | 0.26 | 192 | 1920 | 154 | 1540 | 1550 | 2/450 | ||||
| 4IK25GNL-A | Induction | 25 | 1-phase 110 | 50 | 0.48 | 231 | 2310 | 185 | 1850 | 1250 | 6/250 |
| 60 | 0.46 | 192 | 1920 | 154 | 1540 | 1550 | 6/250 | ||||
| 4RK25GNL-A | Reversible | 50 | 0.50 | 231 | 2310 | 185 | 1850 | 1250 | 8/250 | ||
| 60 | 0.56 | 192 | 1920 | 154 | 1540 | 1550 | 8/250 | ||||
| 4IK25GNL-U | —— | 25 | 3-phase 380 | 50 | 0.14 | 231 | 2310 | 185 | 1850 | 1250 | —— |
| 60 | 0.12 | 192 | 1920 | 154 | 1540 | 1550 | —— | ||||
| 4RK25GNL-S | —— | 25 | 3-phase 220 | 50 | 0.24 | 231 | 2310 | 185 | 1850 | 1250 | —— |
| 60 | 0.225 | 192 | 1920 | 154 | 1540 | 1550 | —— | ||||
| 4IK30GNL-C | Induction | 30 | 1-phase 220 | 50 | 0.28 | 275 | 2750 | 220 | 2200 | 1250 | 2.2/450 |
| 60 | 0.3 | 231 | 2310 | 185 | 1850 | 1550 | 2.2/450 | ||||
| 4RK30GNL-C | Reversible | 50 | 0.3 | 275 | 2750 | 220 | 2200 | 1250 | 2.5/450 | ||
| 60 | 0.32 | 231 | 2310 | 185 | 1850 | 1550 | 2.5/450 | ||||
| 4IK30GNL-A | Induction | 30 | 1-phase 110 | 50 | 0.58 | 275 | 2750 | 220 | 220 | 1250 | 8/250 |
| 60 | 0.60 | 231 | 2310 | 185 | 1850 | 1550 | 8/250 | ||||
| 4RK30GNL-A | Reversible | 50 | 0.60 | 275 | 2750 | 220 | 2200 | 1250 | 10/250 | ||
| 60 | 0.65 | 231 | 2310 | 185 | 1850 | 1550 | 10/250 | ||||
Allowable load for the gear motor
Geared-down parameter | Synchronous speed(r/mn) | 500 | 300 | 250 | 200 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 40 | 35 | 30 | 25 | 20 | 15 | 12 | 10 | 8 | 7 | 6 | 5 | |
| ratio | 3 | 5 | 6 | 7.5 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 100 | 120 | 150 | 180 | 200 | 250 | 300 | ||
| Max allowable load | 25W | kg.cm N.m | 4.5 0.45 | 7.9 0.79 | 9.46 0.93 | 12 1.18 | 15.7 1.55 | 19 1.86 | 23 2.25 | 28.4 2.78 | 31.5 3.1 | 35 3.43 | 42 4.12 | 51.1 5.01 | 56.7 5.57 | 62 6.18 | 76.6 7.52 | 80 7.84 | |||||||
| 30W | kg.cm N.m | 5.7 0.56 | 8.1 0.8 | 11.3 1.1 | 14.2 1.39 | 18.9 1.85 | 23.6 2.32 | 28.3 2.78 | 34 3.34 | 37.8 3.7 | 42.5 4.17 | 51.1 5.0 | 60.2 6.01 | 68.1 6.68 | 80 7.84 | ||||||||||
40W L-type series reduction motor
| Motor model | Specs | Output Power W | Voltage V | Frequency Hz | Current A | Starting Torque | Rated Torque | Rated Revolution r/min | Capacity/Ve u F/VAC | ||
| JWD types | mN,m | gf.cm | mN.m | gf.cm | |||||||
| 51K40GNL-C | Induction | 40 | 1-phase 220 | 50 | 0.35 | 367 | 3670 | 294 | 2940 | 1300 | 2.5/450 |
| 60 | 0.33 | 307 | 3070 | 246 | 2460 | 1550 | 2.5/450 | ||||
| 5RK40GNL-C | Reversible | 50 | 0.38 | 367 | 3670 | 294 | 2940 | 1300 | 3.0/450 | ||
| 60 | 0.4 | 307 | 3070 | 246 | 2460 | 1550 | 3.0/450 | ||||
| 51K40GNL-A | Induction | 40 | 1-phase 110 | 50 | 0.70 | 367 | 3670 | 294 | 2940 | 1300 | 10/250 |
| 60 | 0.72 | 307 | 3070 | 246 | 2460 | 1550 | 10/250 | ||||
| 5RK40GNL-A | Reversible | 50 | 0.76 | 367 | 3670 | 294 | 2940 | 1300 | 12/250 | ||
| 60 | 0.80 | 307 | 3070 | 246 | 2460 | 1550 | 12/250 | ||||
| 5IK40GNL-U | —— | 40 | 3-phase 380 | 50 | 0.24 | 367 | 3670 | 294 | 2940 | 1300 | — |
| 60 | 0.22 | 307 | 3070 | 246 | 2460 | 1550 | |||||
| 5RK40GNL-S | 40 | 3-phase 220 | 50 | 0.42 | 367 | 3670 | 294 | 2940 | 1300 | ||
| 60 | 0.38 | 307 | 3070 | 246 | 2460 | 1550 | |||||
Allowable load for the gear motor
Geared-down paramete | Synchronous speed(r/mn) | 500 | 300 | 250 | 200 | 150| | 120 | 100 | 75 | 60 | 50 | 40 | 35 | 30 | 25 | 20 | 15 | 12 | 10 | 8 | 7 | 6 | 5 | 3 | |
| ratio | 3 | 5 | 6 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 100 | 120 | 150 | 180 | 200| | 250 | 300 | 500 | ||
| Max allowable load | 40W | kg.cm N.m | 7.3 0.72 | 12 1.18 | 14.5 1.43 | 18 1.77 | 24.2 2.4 | 30 2.94 | 36 3.53 | 43.6 4.28 | 55 5.0 | 65.5 6.24 | 78 7.7 | 87 8.57 | 98 9.64 | 100 9,81 | |||||||||
Dimensions




FAQ
Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds
What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.
How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.